K K Geo System | 3D Scanning & Metrology Solutions IndiaPrecision 3D Laser Scanning & Dimensional Metrology Solutions
K K Geo System | 3D Scanning & Metrology Solutions IndiaMetallurgy / Metzer / Inverted Metallurgical Microscopes
METZER / METALLURGY
Examine polished metal sections from below with inverted microscopes for microstructure inspection and digital imaging.
Enquire About This Range
Metzer · Inverted Metallurgical Microscopes
Metzer inverted metallurgical microscopes place the objectives beneath the stage, with the prepared specimen face pointing downwards. This arrangement supports examination of mounted samples and metallic sections without positioning an objective above the sample. Choose the optical configuration for the features you need to observe, then add compatible imaging and analysis tools for documentation.
Typical applications include prepared metal and alloy sections, cast iron examination and comparative microstructure studies. Surface preparation, illumination and the selected objectives determine which features can be resolved.
THE METZER RANGE
Compare the specification highlights and choose a model to discuss with our team.
Binocular viewing of prepared sections.
Head
45° binocular
Magnification
50–450×
Illumination
12 V / 50 W halogen
Trinocular inverted microscopy.
Viewing
Trinocular
Focusing
Coaxial coarse / fine
Imaging
Vertical camera tube
Inverted microscopy with a mechanical stage.
Head
45° trinocular
Stage
180 × 155 mm
Illumination
12 V / 50 W halogen
LED illuminated inverted microscopy.
Head
30° trinocular
Objectives
5×, 10×, 20×, 50×
Illumination
5 W LED
Bright-field and dark-field examination.
Eyepieces
10× / 22 mm field
Stage
225 × 180 mm
Contrast option
DIC accessories
Share your specimen, application and required capacity with our team to confirm the suitable configuration.
Answers to common questions about inverted metallurgical microscopes.
How does an inverted microscope differ from an upright microscope?
An inverted microscope views the prepared face from below; an upright microscope views it from above. The choice depends on specimen handling, stage support and the optical access needed for the examination.
Does the specimen need polishing?
Microstructure examination generally requires a prepared surface. Cutting, mounting where needed, polishing and any appropriate etching should follow the material and examination method.
Can images be measured using software?
Yes, with compatible imaging and analysis software. Dimensional measurements require calibration for the optical and camera configuration used.
Which details help select a model?
Share the specimen dimensions and weight, prepared face size, required contrast methods and example images or reports. These define the stage, optics and imaging requirements.
Send your sample dimensions, material and required observation modes to K K Geo System. Include camera and analysis requirements for a proposed configuration.
Request a Quotation