Optical 3D Scanners · India enquiries
MetraSCAN BLACK2 optical 3D scanner
MetraSCAN BLACK2 supports optical scanning with C-Track and a stand-alone scanning mode. Evaluate it when the inspection setup must handle both tracked measurement and access constraints, using the specification and reference requirements for each mode.
What can MetraSCAN BLACK2 help you achieve?
Use two scanning modes
Work with C-Track or stand-alone scanning according to the measurement task.
Reach beyond tracker visibility
Use the stand-alone mode for areas where tracker visibility is restricted, within its specified performance conditions.
Support component inspection
Capture surfaces for CAD comparison and dimensional reporting in compatible software.
Application fit
When should you consider MetraSCAN BLACK2?
- Inspection requiring both tracked and stand-alone scanning
- Components with restricted tracker visibility
- Surface measurement with compatible HandyPROBE probing
Application support from K K Geo System Pvt Ltd
Our team helps you select the scanner, required operating modes, tracking configuration and software around your components and required output. Share your application so we can recommend a suitable configuration.
MetraSCAN BLACK2 — models and specifications
| Operating mode | Published performance | Reference setup |
|---|---|---|
| C-Track scanning | Accuracy: 0.025 mm | C-Track optical tracking |
| C-Track scanning: 9.1 m³ | Volumetric accuracy: 0.064 mm | Specified measurement volume |
| C-Track scanning: 16.6 m³ | Volumetric accuracy: 0.075 mm | Specified measurement volume |
| Stand-alone scanning | 0.020 mm + 0.040 mm/m | Stand-alone reference setup |
The 0.025 mm headline accuracy applies to C-Track mode. Stand-alone mode has its own specification; compatible HandyPROBE contact measurement is a separate workflow.
Published specifications apply to the manufacturer’s configuration and test conditions.
How does MetraSCAN BLACK2 fit into your workflow?
The application determines whether scanning uses C-Track or stand-alone mode. Surface data is captured under the selected reference setup, then aligned and analysed using that mode’s measurement conditions.
Watch MetraSCAN BLACK2 in action
See the equipment in use
Watch this MetraSCAN BLACK2 video, then discuss your application with our team.
Video opens on YouTube in a new tab.
What should a MetraSCAN BLACK2 quotation specify?
The quotation for MetraSCAN BLACK2 depends on the scanner, required operating modes, tracking configuration and software. K K Geo System Pvt Ltd can recommend a configuration for your application and provide a proposal covering the agreed equipment, training and support.
Your MetraSCAN BLACK2 questions answered
When is stand-alone mode useful?
It provides a scanning route where tracker visibility is restricted. The stand-alone reference setup and its own accuracy specification apply.
Is accuracy the same in both modes?
No. C-Track mode publishes 0.025 mm accuracy. Stand-alone mode is specified at 0.020 mm + 0.040 mm/m; the figures are not interchangeable.
Can BLACK2 work with contact probing?
Compatible HandyPROBE equipment adds contact measurement of selected features. Probing and scanning are different measurement workflows within the supported system configuration.
Which alternatives should you compare?
Compare BLACK+ Series · Review compatible probing needs
Discuss your application
Discuss your MetraSCAN BLACK2 application
Share your component and measurement requirements so K K Geo System Pvt Ltd can recommend a suitable configuration and arrange a relevant demonstration.