K K Geo System | 3D Scanning & Metrology Solutions IndiaPrecision 3D Laser Scanning & Dimensional Metrology Solutions
K K Geo System | 3D Scanning & Metrology Solutions IndiaMetallurgy / Metzer / Metallographic Specimen Mounting Presses
METZER / METALLURGY
Support specimens for handling, polishing and examination with Metzer metallographic mounting presses.
Enquire About This Range
Metzer · Metallographic Specimen Mounting Presses
Metzer metallographic specimen mounting presses support sample preparation by forming a mount around a suitable specimen. Mounting can make small or irregular sections easier to handle during polishing and examination. The mounting process and material should suit the specimen, the features to be retained and the preparation equipment used next.
Mounting is used for suitable metallographic sections requiring easier handling, consistent holder fit or support during surface preparation.
THE METZER RANGE
Compare the specification highlights and choose a model to discuss with our team.
Mounting press for 30 mm specimens.
Mount diameter
30 mm
Heating maximum
190°C
Holding time
0–30 minutes
Mounting press for 45 mm specimens.
Mount diameter
45 mm
Heating maximum
190°C
Holding time
0–30 minutes
Controlled heating and cooling.
Mount diameter
30 mm
Heating range
100–200°C
Holding time
0–999 seconds
STAR-series heating and cooling controls.
Heating range
100–200°C
Cooling range
20–90°C
Holding time
0–999 seconds
Pressure-controlled mounting configuration.
Metric mould options
25 / 30 / 40 / 50 mm
System pressure
0–20 MPa
Heating range
90–200°C
Share your specimen, application and required capacity with our team to confirm the suitable configuration.
Answers to common questions about metallographic specimen mounting presses.
Does every metallographic specimen need mounting?
No. Mounting is useful when a specimen needs additional support or easier handling. Larger specimens may be prepared without a mount if the equipment and method allow.
Can heat-sensitive samples be mounted in a press?
Heat and pressure sensitivity must be assessed before using a press-based process. Such samples may require another mounting method; selection should follow the material and examination needs.
How should I choose the mount diameter?
Choose a size that accommodates the specimen and is compatible with the preparation holder. Use the confirmed mould dimensions for the selected press.
What is needed for a quotation?
Provide specimen dimensions, mounting medium, required mount size, preparation volume and polishing holder details.
Share your specimens and current preparation process with K K Geo System for a Metzer mounting press enquiry.
Request a Quotation